Omron F3SG-PG Series, Руководство пользователя, Страница: 293 / 473

263
F3SG-SR/PG
User’s Manual
Chapter
4
M
onitor
in
g
with
SD M
a
nag
e
r
3
Setting with SD Manager 3
E
4-4. Monitoring with SD Manager 3
For F3SG-PGA-C, the number of the beams displayed is a half of that specified on the model.
For more information on the number of the beams specified for each model, refer to
1-6-1-2. F3SG-PG Series .
4-4-1. Monitoring
Logging in is not needed to perform the monitoring functions described in this section.
4-4-1-1. Incident Light/Ambient Light
This function can be used only when the F3SG-SR/PG is connected to the Intelligent Tap and a PC.
On the Top page, click the icon below.
The screen below is displayed.
No. Function Description
1 Select light level
monitoring function Select incident light level or ambient light level to be monitored and chart or list view.
2 No. of beams to be
displayed Select the number of F3SG-SR/PG beams to be displayed.
3 Show/hide held peak and
bottom hold Shows the maximum and minimum values of a selected light level by light blue and pink
lines, respectively when [Show] is selected.
4 Select unit of vertical axis
*1*2 Switch the unit of the vertical axis on the chart between Percent and Level. When [Percent]
is selected, the light level is shown in percentage based on the ON threshold value as
100%. When [Level] is selected, the light level is converted to voltage.