Omron F3SG-PG Series, Руководство пользователя, Страница: 269 / 473

239
F3SG-SR/PG
User’s Manual
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
Setting with SD Manager 3
E
Click the [Zone Setting] button to configure the designated beam output.
Zone setting is possible for desired channel and beam (in 1-beam increments). The settings after the zone is determined
are displayed in the zone information area under the chart.
For more information on designated beam output, refer to 2-23. Designated Beam Output .
When changing the settings is complete, confirm the settings and write the configuration to the F3SG-SR/PG.
To enable the written configuration, refer to
4-2-7-3. Writing Configuration into Intelligent Tap .
When connecting the Intelligent Tap to a F3SG-SR/PG and trying to return the F3SG-SR/PG to [Detecting], follow step 4
of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR/PG and Intelligent Tap, or click
the [Monitor] button.
No. Function name Description Initial value Configurable item
1 Designated Beam
Output Select Enable or Disable for the Designated Beam
Output function.
When you want to restore the settings received from
the F3SG, execute [Recover status at readout]. Disable Enable/Disable
2 Setting by Select manual setting using this software or setting by
teach-in. Manual Manual/Teach-in
3 Zone setting Select a desired zone number. To configure zone
settings, specify desired bottom and top beam
numbers from the drop-down list, or directly on the
chart. When you check the [Designate from chart] box,
you can specify a zone range by dragging red lines
shown on the chart. • Bottom beam:
Not specified
• Top beam:
Not specified
Desired beam
(in 1-beam increments)
4 Confirm zone To confirm the setting of the specified zone, execute
[Confirm Zone]. - -
5 Designated beam
state Select either Dark-ON or Light-ON. Dark-ON Dark-ON/Light-ON
6 Close Returns to Auxiliary Output/Lamp setting. - -