Omron F3SG-PG Series, Руководство пользователя, Страница: 277 / 473

247
F3SG-SR/PG
User’s Manual
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
Setting with SD Manager 3
E
For more information on zone adjacency conditions, refer to 2-19. Setting Zone Adjacency Conditions .
When changing the settings is complete, confirm the settings and write the configuration to the F3SG-SR/PG.
To enable the written configuration, refer to
4-2-7-3. Writing Configuration into Intelligent Tap .
When connecting the Intelligent Tap to a F3SG-SR/PG and trying to return the F3SG-SR/PG to [Detecting], follow step 4
of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR/PG and Intelligent Tap, or click
the [Monitor] button.

Floating Blanking Setup Procedure
1.
Enable the Floating Blanking function (No. 1).
2.
Set up the Floating Blanking function (No. 3).
3.
Set up the number of floating beams (No. 3).
4.
Set up the number of allowable beams (No. 3).
5.
Set up the Temporarily Disable Monitoring function (No. 4).
When Enable is selected, also set up the monitoring-temporarily-disabled time limit (No. 4).
This function is only available when [Lockout] or [Cancel blanking zone] option is selected for the Floating Blanking
Monitoring function.
6.
Click the [Write configuration] button. On the settings list which will appear, confirm that the changed
settings are correct, and click the [OK] button.