Omron F3SG-PG Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 473

Omron F3SG-PG Series Скачать руководство пользователя страница 2

Introduction

Thank you for purchasing the F3SG-SR Series Safety Light Curtain (hereafter called the "F3SG-SR", "F3SG-SRA",

"F3SG-SRB", or "sensor")/F3SG-PG Series Multi-beam Safety Sensor (hereafter called the "F3SG-PGA-A",

"F3SG-PGA-L", "F3SG-PGA-C", or "sensor").

This is the instruction Manual describing the use of F3SG-SR/PG.

Always heed the following points when using the product:

Original instructions

Trademarks

• Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
• Windows, Windows 7, Windows 8, Windows 10, Microsoft .NET Framework, and Surface are either registered

trademarks or trademarks of Microsoft Corporation in the USA and other countries.

• Official name of Windows 7 is Microsoft Windows 7 Operating System.
• Official name of Windows 8 is Microsoft Windows 8 Operating System.
• Official name of Windows 10 is Microsoft Windows 10 Operating System.
• USB Type-C™ is a trademark of USB Implementers Forum.
• The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

• Google and Android are trademarks of Google LLC.
• Xperia is either a registered trademark or a trademark of Sony Mobile Communications Inc.
• SHARP and AQUOS are registered trademarks of Sharp Corporation.
• ASUS is a trademark of ASUSTeK Computer Inc.
• GALAXY S is a registered trademark of Samsung Electronics Co., Ltd.
• HUAWEI is either a registered trademark or a trademark of HUAWEI TECHNOLOGIES Co., Ltd.
• Mi and XIAOMI are either registered trademarks or trademarks of BEIJING XIAOMI TECHNOLOGY CO., LTD.
• Other company names and product names in this document are the trademarks or registered trademarks of their

respective companies.

• Be sure to have F3SG-SR/PG be handled by a "Responsible Person" who is well aware of and familiar with the

machine to be installed.

• The term "Responsible Person" used in this document means the person qualified, authorized and responsible to

secure"safety" in each process of the design, installation, operation, maintenance services and disposition of the machine.

• It is assumed that the F3SG-SR/PG will be used properly according to the installation environment, performance and

function of the machine. Responsible Person should conduct risk assessment on the machine and determine the

suitability of this product before installation.

• Read this document thoroughly to understand and make good use of the descriptions before installing and operating

the product.

• Keep this document at the place where the operator can refer to whenever necessary.

«
1
2
3
4
...
»

Содержание F3SG-PG Series


























































































































































































































































































































































































































































































Отзывы:

Нет отзывов