Omron EasySpeed 3G3JE, Руководство пользователя

Страница: 63 / 133

Chapter 3
3-3
Operation
3-1 Key Operation Flowchart
SP1
SP2
SP3
45 5
40
.
0
50
.
0
.
sp2
sp1
sp3
SP1: Frequency reference1
SP2: Frequency reference 2
SP3: Frequency reference 3
SP4: Frequency reference 4
ACC: Acceleration time
DEC: Deceleration time
LOD: Application selection
Frequency reference: Hz set
Output frequency: Hz out
Output current: A
P01: Rated motor current
P16: Communications
baud rate
P18: Communications
stop bits
P19: Communications parity
P20: Parameter initialization
Changed by Mode Key.
Changed by Mode Key.
Changed by Mode Key.
Changed by Mode Key.
Changed by Mode Key.
Display
Display
Display
Display/setting
Display/setting
Example: Changing the Set Value
Adjustment Mode
(1) Move to Adjustment Mode and
press the Enter Key to display
the present set value.
The data display will flash while
a set value is being changed.
(3) Press the Enter Key to enter
the desired setting.
Changed by Increment
and Decrement Keys.
Changed by Increment
and Decrement Keys.
Changed by Increment
and Decrement Keys.
Changed by Increment
and Decrement Keys.
Changed by Increment
and Decrement Keys.
Changed by Increment
and Decrement Keys.
Accumulated operating time:
Kh
Forward/reverse operation
selection: FWD/REV
P02: Accumulated operating
time standard
P03: DC injection braking
frequency
P04: Startup DC injection
braking time
P05: DC injection braking-
to-stop time
P06: Maximum output
frequency
P07: Frequency reference
upper limit
P08: Frequency reference
lower limit
P09:
Momentary power
interruption restart selection
P10: Operation command
selection
P11: Frequency reference
selection
P12: Multi-function output
selection
P14: Carrier frequency
selection
P15: Communications unit
number
P17: Communications
data length
P21: Accumulated operating
time clear
P15 through P19 are displayed and can be
set only for Communications Models.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Changed by
Increment and
Decrement Keys.
Note: The data display will flash
while the setting is being
entered and will return to the
setting item name when the
flashing stops.
Mode can be change during
operation or when stopped.
Mode can be change
only when stopped.
Mode can be change only when stopped.
Mode cannot be change directly.
Adjustment Mode
RUN Mode
Power ON
Initial Settings Mode
All the indicators light when the power is turned ON.
(Key operations are disabled.)
(See
note 1.)
(See
note 2.)
Note 1:
2:
P11 can be set only on Standard Models.
P13: Reverse rotation prohibit
selection
(2) Use the Increment and
Decrement Keys to change
the set value.
Press the Mode Key for at least 1 s.
Press the Enter Key for at least 1 s.
Press the Mode Key for at least 1 s.