Omron EasySpeed 3G3JE, Руководство пользователя

Страница: 114 / 133

Chapter 6
6-2
Parameter Tables
■
Changing between Modes
■
Conditions for Setting and Monitoring in Each Mode
Note If the power is turned OFF while a setting is being changed, the change will be lost when power
is turned back ON.
■
Indicator Operation
Mode Setting/monitoring item Motor operating Motor stopped
Monitor
set value
Change
set value
Stop Monitor
set value
Change
set value
Start
RUN mode Frequency reference Yes Yes Yes Yes Yes Yes
Output frequency Yes No Yes Yes No Yes
Output current Yes No Yes Yes No Yes
Accumulated operating
time Yes No Yes Yes No Yes
Forward/reverse opera-
tion selection Yes Yes Yes Yes Yes Yes
Adjustment
mode Frequency references 1 to
4 Yes Yes Yes Yes Yes Yes
Acceleration/deceleration
time Yes No Yes Yes Yes Yes
Application selection Yes No Yes Yes Yes Yes
Initial set-
tings mode P01 to P21 No No No Yes Yes No
Name Indicator Description Reference
page
RUN indicator @ RUN Lit while a RUN command is being applied. 1-4
Reverse operation
indicator
@
RVS Lit while an RVS command is being applied. 1-4
Alarm indicator
@
ALM Lit when a fault occurs or when a protective function operates.
(Faults can be monitored in RUN mode.) 1-4
Communications
indicator @ COM Lit during communications (sending or receiving) (Communi-
cations Models only). 1-4
Adjustment Mode
RUN Mode
Power ON
Initial Settings Mode
All the indicators light when the power is turned ON.
(Key operations are disabled.)
Mode can be change during
operation or when stopped.
Mode can be change
only when stopped.
Mode can be change only when stopped.
Mode cannot be change directly.