Omron CompoNetT E3NW-CRT Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 102

background image

7

E3NW-CRT

User’s Manual

Intro

duc
tion

Introduction

Precautions for Safe Use

Observe the following precautions when using the Digital Sensor Communications Unit:

●

Power Supply

• Take appropriate measures to ensure that the specified power with the rated voltage

and frequency is supplied. Be particularly careful in places where the power supply is
unstable.

• Always turn OFF the power supply to the PLC, Slave Units, and other Units before

attempting any of the following.

• Assembling the Units (Expansion Units)
• Mounting or dismounting terminal blocks on Remote I/O Terminals
• Mounting or dismounting an I/O Unit, CPU Unit, Power Supply Unit, Memory Cas-

sette, or Master Unit

• Replacing component relays
• Setting DIP switches or node address switches
• Connecting or wiring the cables

●

Installation

• Before touching the Unit, be sure to first touch a grounded metallic object in order to

discharge any static buildup.

• Be sure that the terminal blocks, communications cables, and other items with locking

devices are properly locked into place.

• Always use the enclosed End Plates to securely mount the Units to the DIN Track.
• Be sure that all the terminal screws and cable connector screws of the product are

tightened to the torque specified in the relevant manuals.

• Be sure that the screws of the terminal block are tightened to the torque specified in

the relevant manuals. Insufficient tightening torque may result in fire, malfunction, or
failure.

• Always use specified communications cables and connectors.
• Abide by the specifications for the communications distance and the number of Units

to be connected.

• When using cables in multiple systems, be sure to keep the distance of 5 mm or more

between any two cables to avoid operational instability due to interference.

●

Wiring

• Confirm that the wiring and switch settings are correct before supplying power.
• Use the correct wiring tools to perform wiring.
• Confirm terminal polarity before wiring.
• Do not let a piece of metal enter the Units when wiring or installing.
• Be careful of the following when wiring communications cables.

• Keep communications cables away from power lines and high-voltage lines.
• Do not fold over communications cables.
• Abide by the specifications for the communications cable distance.
• Do not place objects on top of communications cables.
• Always wire communications cables through a duct.

●

Handling

Precautions for Safe Use

«
...
7
8
9
10
11
...
»

Содержание CompoNetT E3NW-CRT







































































































Отзывы:

Нет отзывов

Похожие инструкции для CompoNetT E3NW-CRT

Univerge SV9100

Бренд: NEC Страницы: 478

Univerge UM8000

Бренд: NEC Страницы: 46

Бренд: JBL Страницы: 24

Бренд: RADVision Страницы: 39

Бренд: QNAP Страницы: 35

Бренд: Measurement Computing Страницы: 32

AUTOPULSE IQ-318

Бренд: Notifier Страницы: 62

MorphoAccess VP MD

Бренд: Idemia Страницы: 29

Бренд: Hame Страницы: 26

Бренд: Jensen Marine Страницы: 18

Бренд: Woodward Страницы: 84

PressureMAT PMAT2

Бренд: PendoTECH Страницы: 48

Бренд: auna multimedia Страницы: 9

Бренд: TANDBERG Страницы: 172

Бренд: LOGICDATA Страницы: 32

Бренд: Emerson Страницы: 16

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды