Omron CompoNetT E3NW-CRT, Руководство пользователя

Страница: 49 / 102

47
E3NW-CRT
User’s Manual
Sect
ion 3
CompoN
et
Communic
a
tions
Spec
if
ic
at
ions
Section 3
CompoNet Remote I/O Communications
●
Command Data
Refer to Command Descriptions and Data Formats in Section 5 Appendices for details on
read, write, and execute command data.
●
Error Flags
The following table lists the error flags.
Light OFF Both --- --- 0xC8 OK OK OK
Clear Light OFF Both --- --- 0xDD OK OK OK
Two-point Tuning First Point Outputs 1 and 2 --- --- 0xC9 OK OK OK
Two-point Tuning Second Point Outputs 1 and 2 --- --- 0xCA OK OK OK
Position Tuning Outputs 1 and 2 --- --- 0xCB OK OK NA
Full Auto Tuning Setup Outputs 1 and 2 --- --- 0xCC OK OK OK
Execute Full Auto Tuning Outputs 1 and 2 --- --- 0xCD OK OK OK
Percentage Tuning Setting Outputs 1 and 2 0x6E 0xCE --- OK OK NA
Percentage Tuning Level Outputs 1 and 2 0x6F 0xCF --- OK OK NA
Execute Percentage Tuning Outputs 1 and 2 --- --- 0xD0 OK OK NA
Power Tuning Setting Both 0x71 0xD1 --- OK OK NA
Power Tuning Level Both 0x72 0xD2 --- OK OK NA
Execute Power Tuning Both --- --- 0xD3 OK OK NA
One-point Tuning Outputs 1 and 2 --- --- 0xD4 NA NA OK
Flashing Both --- --- 0xD7 OK OK OK
Clear Flashing Both --- --- 0xDE OK OK OK
Initialize Both --- --- 0xD8 OK OK OK
Self-Trigger Level Both 0x79 0xD9 --- NA NA OK
Tuning without a Workpiece Outputs 1 and 2 --- --- 0xDA NA NA OK
Background Suppression Both 0x7B 0xDB --- NA NA OK
Error Flag Description
01 A command that cannot be processed by the Sensor Amplifier Unit was specified.
02 A command was executed when the Sensor Amplifier Unit could not respond.
04 The command data value is outside the Sensor Amplifier Unit’s allowable range.
08 A checksum error occurred.
10 The TRIGGER bit was turned OFF while execution of a command was in progress.
20 The command response timed out.
40 A command was sent to a disconnected Sensor Amplifier Unit
An incorrect Sensor output number was sent.
The command data value was outside the command’s allowable range.
Description
Output 1 and 2,
or Both
Read Write Execute
Applicable Sensor
Amplifier Units
FA0 LA0 SA0
OK: Supported, NA: Not supported, ---: To communication unit