manualshive.com logo in svg

Omron 3G3MV-P10CDT-E, Руководство пользователя

Поделиться
Скачать
Omron 3G3MV-P10CDT-E Скачать руководство пользователя страница 46

Installation and Wiring

 

SECTION 3

 

 

Mounting Procedure 

 

Caution

 

Before installing and wiring an Optional Unit, always turn OFF the power to 
the SYS-DRIVE 3G3MV Inverter and wait for the CHARGE indicator to turn 
OFF. 

 

 1.

 

Turn OFF the main circuit power supply for the Inverter, wait for at least one 
minute from the time the LED indicator or the CHARGE indicator goes out, 
and remove the front cover of the Inverter along with the Operator. 

 

 2. 

Wire the main circuit terminals and control circuit terminals of the Inverter. 
(When the 3G3MV-P10CDT Unit is mounted, the terminal block of the In-
verter will be covered. Therefore, be sure to complete wiring for the Inverter 
terminals first.) 

 3. 

When the Operator of the Inverter is removed, it will be possible to see a 
block secured at three places underneath. Using pliers or another appropri-
ate tool, loosen the fixings, and remove the block. The connector for Optional 
Unit connections will become visible. At this point, ensure that dirt or foreign 
objects do not enter the connector. 

33

 

Содержание 3G3MV-P10CDT-E















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды