Omnitracs MCP50, Инструкция по установке и устранению неисправностей

Страница: 99 / 124

80-JB566-1 Rev. G B-1
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
B
Environmental and Power Requirements
MCP50 Environmental and Power Requirements
The MCP50 system has no user-serviceable parts. The DIU50 contains a permanent lithium
coin cell for maintaining the real time clock; proper recycling or disposal per local law is
required for all components of MCP50.
Condition Requirement
Operating Temperature -30° C to 70° C (-35° F to 158° F)
Vibration/Shock Vehicle Telematics Module 50 (VTM50)
does not have a shock tray.
VTM must be mounted securely.
Humidity
Antenna
VTM50
Display interface unit 50 (DIU50)
Not watertight. DO NOT get wet.
Not watertight. DO NOT get wet.
Not watertight. Turn over immediately if
liquids are spilled on it.
Power +6 to +18 Volts DC
Operating at +12V (VTM and DIU) MCP50 draws a maximum of 2 amps.
Average current draw is approx. 1 amp.
Asleep MCP50 draws 10 mA.
Frequency of Gobi modems 800 MHz 1x
1900 MHz EVDO (when supported)