Omnitracs MCP50, Инструкция по установке и устранению неисправностей

Страница: 77 / 124

80-JB566-1 Rev. G 25-1
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
25
Performance Monitoring Troubleshooting
System Overview
Connecting to the truck’s data link is required for the Performance Monitoring application.
The truck must also have the proper Data Bus configuration for the MCP50 to access the
truck’s data. This can be set up via the Vehicle Data Configurator on the Customer Portal.
The Performance Monitoring application records data from the vehicle such as speed,
distance, RPMs, and fuel used.The data is retrieved from the truck by the MCP50 and sent to
the host computer, either manually or automatically at preset intervals.
The hardware installation on the vehicle consists of connecting the MCP50 Power/IO
connector to the truck’s diagnostic connector.
Note : If the Performance Monitoring icon is grayed out, the Performance Monitoring
application is not enabled. Call your company dispatch to have this application
enabled.
Normal Performance
Once the Power/IO connection to the truck’s diagnostic connector has been made, company-
defined parameters are sent and received by the unit, performance monitoring data will be
recorded at the mobile and sent to the host system.
To confirm normal performance, first verify that performance monitoring parameters have
been sent to the unit and received. Tap the
Parameters tab within the Performance
Monitoring application and verify the tag field is not “0.”