Omnitracs MCP50, Инструкция по установке и устранению неисправностей

Страница: 82 / 124

Event Not Triggered Critical Event Reporting Troubleshooting
26-2 80-JB566-1 Rev. G
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Event Not Triggered
CER Verify Configuration
1. To access CER information, go to the Home screen and tap the Critical Event
Reporting button. If this button is grayed out, then CER service for the unit must be
enabled from the Customer Portal.
2.
A popup will appear. Tap the Diagnostics button.
3. Select one of the tabs for General, Roll Stability, Lane Departure information, or
Collision Warning.