OmniSense ARELCO CIP10, Руководство пользователя

Страница: 5 / 36

NOTICE OF ATEX INSTRUCTIONS
3
2.3. D
EVICE OPERATION
The CIP10 is currently worn on the worker’s chest.
Several versions of particle selectors are proposed with the CIP10 for sampling
health-related aerosol fractions.
2.4. S
ERVICE AND
M
AINTENANCE
The equipment should not be used if damaged in a way that could invalidate
intrinsic safety. It must be return freight prepaid, for expertise or repair at the fol-
lowing address : ARELCO ARC - 231, rue la Fontaine
FR-94120 FONTENAY SOUS BOIS - FRANCE
Or to other distributor approved by ARELCO ARC.
2.5. I
NSTALLATION
The equipment type CIP10 , will be introduce in the plant by the organism which
must make the sampling. The organism will check with the site manager that the
intrinsic safety rating of the product meets the site requirements.
2.6. C
ALIBRATING THE FLOW RATE
The CIP10 flow rate is adjusted against the method described in the operating
manual. This adjustment will be made outside the dangerous atmosphere.
3. TRAINING INFORMATIONS
The CIP10 enables sampling a specified aerosol fraction depending one of the
size selector placed on the entry of the rotating cup. A regulation circuit controls
the rotation speed for a constant flow rate. The flow rate is adjusted by an inter-
nal potentiometer located inside the device and is made before the sampling at
the required flow rate for the specified selector. To set the flow rate, the calibra-
tion bench or the tachymeter described in the instruction manual must be used.
The flow rate is started when the magnet is slowly passed over the I/O acronym
on the housing (check the LED is lighting).
4. ELECTRICAL SPECIFICATIONS
Battery: 7,2 Volts; 0,6 Ah
Current: 15 +/-2 mA
5. RECHARGING THE BATTERY
The unit includes battery which must be recharged in a non hazardous area with
the ARELCO ARC approved chargers designed for this model.
The internal battery (made from SAFT type 2/3 A 600 or SANYO type KR-
600AE) will have the ARELCO ARC part number ARC 10600.