[email protected] | Installation manual Omnicomm 2.0 terminals v2.2
7
.16 | 19
4.2
1
CONNECT THE CABLES TO THE CONNECTORS OF OMNICOMM OPTIM 2.0 TERMINAL
Connect the antenna connectors and “SIDE 1” connectors (Figure 14).
FIGURE 14
4.2
2
CONNECT THE CABLES TO THE CONNECTORS OF OMNICOMM LIGHT 2.0 TERMINAL
Connect the antenna connectors and “SIDE 1” connectors (Figure 15).
FIGURE 15
5
REQUIRED OPERATIONAL SETTINGS FOR OMNICOMM
2.0 TERMINALS
5.1 TERMINAL CONFIGURATION USING OMNICOMM CONFIGURATOR
Connect the PC to the Omnicomm Terminal in accordance With Figure 91. Power supply to the Omnicomm
Pro
fi
2.0 and Pro
fi
2.0 WiFi Terminal is conducted via the USB interface. To power the Omnicomm Optim 2.0
Terminal, you must be connected to the vehicle on-board network or to power supply unit.
The Omnicomm Terminal con
fi
guration settings are conducted in accordance with the Omnicomm
Con
fi
gurator User Manual.