[email protected] | Installation manual Omnicomm 2.0 terminals v2.2
7
.16 | 27
Attach the protective cover on the Terminal casing using two self-driving screws (Figure 34).
FIGURE 34
7.1.2 Installing protective rotary seals on the protective cover
1) Insert the sealing wire through the holes of the casing of Omnicomm Pro
fi
2.0 or Pro
fi
2.0 WiFi
Terminal and protective cover (Figure 35).
FIGURE 35
2) Insert the ends of the wire through the rotary seal holes.
3) Tighten the wire to full tension and break o
ff
the handle of the ratchet.
7.2 SEALING OF OMNICOMM OPTIM 2.0 TERMINAL
Sealing of Omnicomm Optim 2.0 Terminal is conducted by gluing the protective paper seals on the Terminal
housing, antenna connectors and “SIDE 1” connector (Figure 36 and 37).