73
7.8
Printer head module replacement
There are identification symbols on the cable connector which identify model with which the head
module is compatible:
0.4, 0.,6, 0.8 is the nozzle diameter in [mm].
F
–
Factory 2.0, N
–
Factory 2.0 NET and L
–
500 Lite (head modules are not interchangeable with
each printers)
In order to replace the head module, unplug the connector, loosen the thumb screw and pull the
module down.
Warning: make sure the head modules are not hot or use protective gloves.
Figure 63 unpluging conncetor