38
Omni 500 LITE
Installation of a Network for Online Operation
5.2.1
Network Configuration Using an Ethernet
Cable
In order to connect the printer to the network via an Ethernet cable, it should be connected to the
same network as the computer with which the printer is to be operated.
Router
Computer to control
the printer
An example of a remote control model
After connecting the Ethernet cable, go to the Settings> Network tab, then select the Ethernet
mode using the Edit button. Then use the Connect button to confirm the connection. To check if the
connection has been established, click the Check button, if the word Obtaining is in the IP field, it
means that the printer still needs time to establish a connection correctly. After successful
connection to the network, the printer will report Connected and will present the assigned IP
address below.
After obtaining the IP address, enter it into a web browser on a computer connected to the same
network. After correct connection, the Omni500 LITE remote control panel should appear.
5.2.2
Wi-Fi Network Configuration
When you want to use a wireless network, select the Wi-Fi option in the Settings> Network> Edit
menu, then select the network frequency to which you want to connect. After selecting the
frequency, run the list by clicking the empty SSID: field, then select the appropriate network and
enter the password in the Password field.
After accepting the connection with the Connect button, wait a while for the printer to establish a
connection with the network. The connection status can be checked by clicking the Check button.
After successful connection, the IP address will appear in the IP field to which the computer
connected to the same network should be connected.