61
7.3
Maintenance Schedule
1.
Maintenance performer by user:
Table 7 User Maintenance Schedule
worktime*
printtime*
Maintenance and service activities
X
100
Thorough cleaning of the glass build plate
X
200
Cleaning of extruder gears,
Cleaning the inside of the printer
X
300
Lubrication of the X and Y axis carriages
500
X
CARBON / HEPA filters replacement
1000
X
Checking the working chamber fans,
Cleaning the X, Y and Z axes
*
Worktime and printtime values
can be read on the LCD in the Settings ›About tab
2. Maintenance performer by authorised service:
These activities are also chargeable during the warranty period.
Failure to carry out these activities during the warranty period is considered a voiding of the
warranty.
Table 8 Schedule of Authorized Service Maintenance
worktime*
printtime*
Maintenance and service activities
X
2000
Cleaning the X, Y, Z axes
Cleaning the electronics compartment
Replacing the heads
Replacing the blades of the printout cooling blowers
X and Y axis nuts replacement
Replacement of extruder cables
Lubricating the extruder carriages
X
4000
Replacement of bowden filaments
X and Y axis clutches replacement
X
6000
Cleaning brush replacement
Replacing the Z axis nuts
Replacing the printout cooling blowers
10000
X
Replacing the Z axis clutches
Lubrication of the Z axis carriages
30000
X
Replacing 24V power supplies
*
Worktime and printtime values
can be read on the LCD in the Settings ›About tab