710.1759.01.01-00D
19/09/2018
17
HOW
TO VISUALISE A EVENT (CONTROLLER TYPE “A”)
CONTROLLER Type “A”
The LED warning alarm on
shows that an alarm is taking place.
To see which kind of alarm, the max temperature (minimum) and the length, act as follow:
1)
Press one of the two buttons
or
the display will show “
HAL
” (high temperature alarm)
or “
LAL
” (low temperature alarm) followed by
Max. temperature
or
Min. temperature
,
“
tiM
” will then appear (
tiM
e), followed by the “
length
” in h.mm.
2)
At this point the instrument will show the temperature again
Note: the length defines the partial length in case the alarm is still on
HOW TO RESET AN ALARM EVENT
1)
Press the button
or
, the display shows “
HAL
” (high temperature alarm) or “
LAL
”
(low
temperature alarm).
2)
Keep button
pressed
3)
The display shows: “
rST
”, which after 2 sec starts lightening, to show that the values have
been cancelled
HOW TO VISUALIZE A WARNING/ALARM EVENT (CONTROLLER TYPE “D”)
CONTROLLER Type “D”
The LED warning alarm on
shows that an alarm is taking place.
To see which kind of alarm, the max temperature (minimum) and the length, act as follow:
1)
Press one of the two buttons
or
the display will show “
Hi
” (high temperature alarm) or
“
Lo
“ (low temperature alarm) followed by
Max. temperature
or
Min. temperature
.
HOW TO RESET AN ALARM EVENT
1)
Press the button
or
, the display shows “
Hi
” (high temperature alarm) or “
Lo
” (low
temperature alarm).
2)
Keep button
pressed
3)
The display shows: “
rST
”, which after 2 sec starts lightening, to show that the values have
been cancelled
