OMEO EVOLUTION USER MANUAL
SECTION 8
BATTERIES & CHARGING
68
|
Omeo Lithium-ion / Segway PT
Batteries (Drive batteries)
The Main Charge Port for the Omeo Lithium-ion /
Segway PT Batteries is behind the screw in plug in
the front of the Omeo body above the Footplate.
WARNING
Do not insert the Main Power Cord if the
Charge Port, Power Cord or AC Power outlet
is wet.
To charge the Lithium-ion Batteries:
1. Put your Omeo in a clean, dry place that
is within the recommended charging
temperature range
2. It must be stable, in an upright position with
the Stabilising Legs down
3. Open the Main Charge Port on the front of the
Omeo (
see Figure 32
) and verify that the Main
Charge Port, along with the Power Cord and
AC Power outlet, are dry, clean, and free of
any debris
4. Plug one end of the Power Cord into the Main
Charge Port
5. Plug the other end of the Power Cord into
a grounded AC outlet (100V – 240V; 50Hz
–60Hz) and switch on
6. The Charge Indicator Lights on the Omeo’s
Display Panel should illuminate green to
confirm that the Batteries are charging
(Figure 34: Indicator lights showing charging
Batteries, Pg. 69).
7. For more information on the Charge Indicator
Lights, see Segway PT User Manual (Pg. 89).
Unplugging Your Omeo’s Auxiliary Battery
Charger
When you are ready to use your Omeo:
1. Unplug the Power Cord from both the AC
outlet and your Omeo and store it in a safe
place (for example, the rear hatch of your
Omeo)
2. Close the Charge Port Cover.
Figure 32:
Charge your Omeo’s Lithium-ion
Batteries through the Main Charge Port at the front
of the unit.
