SECTION 4
HOW THE OMEO EVOLUTION WORKS
30
|
OMEO EVOLUTION USER MANUAL
Omeo Parts and Subsystems (cont.)
On Board Control Panels
NOTE:
Panels A and B can be set up on either the
left or right side, depending on the preference
indicated on the Omeo order form. Panel A will
always contain the Steering Selection Lever, Main
Control Switch and Seat Steering Dampening
Control, whereas Panel B will always contain the
Light Switch and USB Port (
Figure 15
).
Main Control Switch
The Main Control Switch is located at the top of
Panel A (see
Figure 15
). To access the Main Control
Switch function, ensure your Omeo is in Joystick
Mode, that is, the Steering Selection Lever is in a
vertical position.
The function of the Main Control Switch is to
simultaneously raise / lower the Stabilising Legs and
enter / exit Balance Mode.
When in Standby Mode:
(The Omeo is powered
on and the 5 Balance indicator lights are green):
•
Press the Main Control switch once to raise
the Stabilising Legs and enter Balance Mode
•
Press the Main Control Switch only once to
then lower the Stabilising legs and exit Balance
Mode.
NOTICE
Do not press the Main Control Switch more
than once to lower the Stabilising Legs.
Main
Control Switch
Steering
Selection Lever
Seat Steer
Dampening Control
PANEL A
Light Switch
USB Port
PANEL B
Figure 15:
On-Board Control Panels (A & B).
NOTICE
Your Omeo must be in Joystick Mode to expose
and therefore use the Main Control Switch.
