SECTION 4
HOW THE OMEO EVOLUTION WORKS
31
|
OMEO EVOLUTION USER MANUAL
Steering Selection Lever
The Steering Selection Lever is beside the Main
Control Switch (
). Use the Steering Selection
Lever to switch the Omeo between Joystick and
full ASC Mode.
When the Steering Selection Lever is in a vertical
position and the Main Control Switch is exposed,
the Omeo is in Joystick Mode and the side to side
movement (ASC) of the seat is locked.
When the Steering Selection Lever is in a
horizontal position, covering the Main Control
Switch, the Omeo is in full ASC Mode with the side
to side movement of the seat enabled.
Seat Steer Dampening Control
The Seat Steer Dampening Control knob
On-Board Control Panels (A & B)
controls the steering sensitivity (side to
side movement) of the ASC. The Seat Dampening
Control can be adjusted at any time, even while
the Omeo is in ASC Balance Mode and moving.
Turn the knob clockwise to decrease steering
sensitivity.
Turn the knob anti-clockwise to increase steering
sensitivity.
For more information refer to the User video in
the User Materials provided (or on the Omeo
Technology website (
omeotechnology.com
) and
Section 11: Customisations (Pg. 87
Light Switch
The Light Switch (on / off) is located on Panel
B
(Figure 15: On-Board Control Panels (A & B)
. It controls both the LED headlights and tail
.
Operational Modes
Your Omeo has several Modes of operation:
•
Standby Mode
•
Active Standby Mode
•
Balance Modes
- Joystick Mode
- ASC Mode
•
Riderless Modes
- Walker Balance Mode
- Free Wheel Mode.
Standby Mode
When you sit on the seat of the Omeo and turn
the power on with the InfoKey™ Controller your
Omeo will be in Standby Mode with the Stabilising
Legs down.
Before you can ride your Omeo you need to
switch to Balance Mode.
Active Standby Mode
This is when you have been riding your Omeo
and you come to a stop and put the stabilising
legs down.
In this mode, the Omeo is still powered on and has
the potential to move when the Joystick is moved.
To change from Active Standby Mode to Standby
Mode, quickly press the Power button on the
InfoKey™ Controller once. The Omeo will beep to
confirm that you have entered Standby Mode.
To enter Balance Mode from Active Standby Mode,
press the Main Control Switch once to raise the
stabilising Legs.
You cannot enter Active Standby Mode when
you first power on your Omeo. You need to have
been in Balance Mode before you can enter Active
Balance Mode.
E.g. Power On, Standby Mode, Balance Mode,
Active Standby Mode, Standby Mode
WARNING
Always make sure that you are in Standby
Mode before attempting move on your Omeo.
If you are in Active Standby Mode and attempt
to move or dismount your Omeo, you risk
damage and / or injury.
Balance Mode
You need to be in Balance Mode to ride your
Omeo.
Balance Mode engages the drive and self-
balancing platform.
Balance Mode has two options: Joystick Mode or
ASC Mode.
Before entering Balance Mode, the Steering
Selection Lever must be vertical, so you have
access to the Main Control Switch (This is
Joystick Mode.)
Enter Balance Mode by fully depressing the Main
Control Switch for 1 second. This will raise the
Stabilising Legs and activate the self-balancing
platform, releasing the forward and backward
movement of the seat.
