![background image](http://html1.mh-extra.com/html/omega/omb-daq-54/omb-daq-54_user-manual_3939920156.webp)
Personal Daq User’s Manual
Appendix B,
887095
API Commands B-23
daqIOReadBit
DLL Function
daqIOReadBit(DaqHandleT handle, daqIODeviceType devType, daqIODevicePort devPort,
DWORD whichDevice, daqIOExpansionPort whichExpPort, DWORD bitNum, PBOOL bitValue);
C
daqIOReadBit(DaqHandleT handle, DaqIODeviceType devType, DaqIODevicePort devPort,
DWORD whichDevice, DaqIOExpansionPort whichExpPort, DWORD bitNum, PBOOL bitValue);
Visual BASIC
VBdaqIOReadBit&(ByVal handle&, ByVal devType&, ByVal devPort&, ByVal whichDevice&,
ByVal whichExpPort&, ByVal bitNum&, bitValue&)
Delphi
daqIOReadBit(handle:DaqHandleT; devType:daqIODeviceType; dvPort:daqIODevicePort;
whichDevice:DWORD; whichExpPort:daqIOExpansionPort; bitNum:DWORD; var
bitValue:longbool)
handle
Handle to the device from which to perform the IO
devType
IO Device type
devPort
IO device port selection
whichDevice
IO device selection
whichExpPort
IO expansion port address
bitNum
IO port bit location to read
Parameters
bitValue
IO port bit value (
TRUE - high, FALSE - low
)
Returns
DerrNoError
No error
See Also
daqIORead, daqIOWrite, daqIOWriteBit
Program References
DIGEX1.C, DAQEX.FRM (VB), DAQEX.PAS (Delphi)
Used With
All devices except Personal Daq/54
Description
daqIOReadBit
allows you to read a specified bit on the selected device and port. The read operation will return the current state of the
selected bit in the
bitValue
parameter. The selected bit (specified by the
bitNum
parameter) corresponds to the IO channel on the port
which is to be read. The
bitValue
will be
TRUE
indicating a high state or
FALSE
indicating a low state.
daqIOWrite
DLL Function
daqIOWrite(DaqHandleT handle, daqIODeviceType devType, daqIODevicePort devPort,
DWORD whichDevice, daqIOExpansionPort whichExpPort, DWORD value);
C
daqIOWrite(DaqHandleT handle, DaqIODeviceType devType, DaqIODevicePort devPort,
DWORD whichDevice, DaqIOExpansionPort whichExpPort, DWORD value);
Visual BASIC
VBdaqIOWrite&(ByVal handle&, ByVal devType&, ByVal devPort&, ByVal whichDevice&,
ByVal whichExpPort&, ByVal value&)
Delphi
daqIOWrite(handle:DaqHandleT; devType:daqIODeviceType; dvPort:daqIODevicePort;
whichDevice:DWORD; whichExpPort:daqIOExpansionPort; value:DWORD);
handle
Handle of the device to perform an IO write operation
devType
IO device type
devPort
IO device port selection
whichDevice
IO device selection
whichExpPort
IO device expansion port address
Parameters
value
Value to write
Returns
DerrNoError
No error
See Also
daqIORead, daqIOWriteBit, daqIOReadBit
Program References
DIGEX1.C, DAQEX.FRM (VB), DAQEX.PAS (Delphi)
Used With
All devices except Personal Daq/54
Description
daqIOWrite
allows you to write to the specified port on the selected device. The write operation will write the settings indicated in the
value
parameter to the selected port. The
value
written will depend on the width of the selected port. Normally, for byte-wide ports, only
the low-order byte of the value parameter will be written. The IO channels for the port correspond to each bit within the value written. If the
channel is to be driven to a high state, then the corresponding bit should be set. Likewise, if the channel is to be driven to a low state, then
the corresponding bit should not be set.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com