![background image](http://html1.mh-extra.com/html/omega/omb-daq-54/omb-daq-54_user-manual_3939920121.webp)
•
Channel Identification
•
Scan Rates and Sequencing
With multiple scans, the time between scans becomes a parameter.
This time can be a constant or can be dependent upon a trigger.
•
Counter/Timer Operation
•
Triggering Options
Triggering starts the A/D conversion. The trigger can be an external analog or
TTL trigger, or a program controlled software trigger.
•
Foreground/Background
Foreground routines
(
…Rd
routines) require the entire transfer to
occur before returning control to the application program.
Background routines
(
… Transfer
routines) start the A/D acquisition and return control to the application program before the transfer
occurs. Data is transferred while the application program is running. Data will be transferred to the
user memory buffer during program execution in 1 or more sample blocks, depending on the
configuration. The programmer must determine what tasks can proceed in the background while
other tasks perform in the foreground and how often the status of the background operations should
be checked.
Parameters in the various A/D routines include: number of channels, number of scans, start of conversion
triggering, timing between scans, and mode of data transfer. Channels can be sampled in consecutive or
non-consecutive order with the same [or different] gains. The scan sequence makes no distinction between
local and expansion channels.
Programming Models
Note:
Two types of VB function wrappers exist for the API functions that reference data buffers. One
type references
an integer buffer
, and the other references a
single-precision floating point buffer
.
The wrappers that reference single-precision floating point buffers have the word
Single
appended to the function name. For example,
VBdaqAdcTransferSetBufferSingle
would be
used to set a single-precision floating point buffer, whereas
VBdaqAdcTransferSetBuffer
be
used to set an integer buffer.
This section outlines basic programming steps commonly used for data acquisition. Consider the models
as building blocks that can be put together in different ways or modified as needed. As a general tutorial,
these examples use Visual Basic since most programmers know BASIC and can translate to other
languages as needed. The following table identifies the API programming models discussed in this
appendix.
Model Type
Model Name
Page
Configuration
Initialization and Error Handling
A-2
Acquisition
Foreground Acquisition with One-Step Commands
Counted Acquisition Using Linear Buffers
Indefinite Acquisition, Direct-To-Disk Using Circular Buffers
Multiple Channel Types
A-4
A-5
A-7
A-10
Initialization and Error Handling
This section demonstrates how to initialize the Personal Daq
and use various methods of error handling.
Most of the example programs use similar coding as detailed
here. Functions used include:
•
VBdaqOpen&(daqName$)
•
VBdaqSetErrorHandler&(errHandler&)
•
VBdaqClose&(handle&)
A-2 API Custom Program
Models
Appendix A,
878495
P
ersonal Daq User’s Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com