![background image](http://html1.mh-extra.com/html/omega/hhp460/hhp460_user-manual_4173123029.webp)
M20013 REL-0000 (2103)
User Manual HHP460 Smart Manometer with Altimeter & Air Speed Test
29 of 72
Data Logging
Review settings before starting a data log
To review the settings on the Smart Manometer before starting a
new data log, follow these steps:
1. From the
Home
screen, press the
Backward
or
Forward
key
until you see DATA LOG.
2. Press the
Information
key to view these seven settings:
Description
Information
Information
VERS.
PRO
(optional)
LITE
AVAIL.PTS
maximum number of
points 100 000
maximum number of
points 240
AVAIL.LOG
maximum number of
logs 128
maximum number of
logs 1
TYP.
MEAS, AVG,
AVG+PK, DEMAND
MEAS
Interval
seconds are
expressed in decimal
points
seconds are
expressed in decimal
points
PTS.CFG.
100 (when time is
configured, points is
blank)
n/a
TIME CFG.
------ (when points
are configured, time
is blank)
n/a
Starting a data log
1. From the Home screen, press the
Backward
or the
Forward
keys until you see
DATA LOG
on screen.
2. Press and hold the
Start
key until
-- Starting --
appears
in the display. Data Logging continues for the defined time or
the defined number of points.
3.
Snsr Error
- means one of the sensors reported an error
after the test began. This will stop the Data Log.
Sensor Error
will appear in the Data Log Pro log.
4. While
DATA LOG
is running, you may press the
Information
key to see how much time is remaining for the active log.
Stopping a data log
To stop the Data Log at any point or at any time, press and hold
the
Stop
key until
-- Stopping --
appears.