![background image](http://html1.mh-extra.com/html/omega/hhp460/hhp460_user-manual_4173123057.webp)
M20013 REL-0000 (2103)
User Manual HHP460 Smart Manometer with Altimeter & Air Speed Test
59 of 72
Usage statistics
Usage presents the amount of memory available on the Smart
Manometer for data logging in two ways:
1. The number of data points used out of a maximum of 100 000.
2. The number of logs used out of a maximum of 128.
Delete All Logs
This button deletes all the logs on the Smart Manometer. This
does not affect the files you saved to the computer in the
Preview
tab.
Note: If the Smart Manometer has a password, then clicking this
button requires you to enter a password. This password was
created in the
Configuration
tab for a sensor.
Read
Save
your configuration changes before you click the
Read
button.
After you click this button, all changes on-screen are replaced
with the configuration that is on the Smart Manometer.
Note: If the Smart Manometer has a password, then clicking this
button requires you to enter a password. This password was
created in the
Configuration
tab for internal sensor.
Press
this button, Data Log Pro reads the parameters from the
Smart Manometer and displays them in the
Setup
tab.
Write
This button remains unavailable until you make a change in
the
Setup
tab. It saves the new setup parameters to the Smart
Manometer and overwrites the parameters stored on the Smart
Manometer.
Note: If a sensor has a password, then clicking this button
requires you to enter a password. This password was created in
the
Configuration
tab.