background image

M20013 REL-0000 (2103)

User Manual HHP460 Smart Manometer with Altimeter & Air Speed Test

4 of 72

General Information

Notification Statements

Disclaimer

Every precaution has been taken in the preparation of this 
manual. Nevertheless, Omega assumes no responsibility for 
errors or omissions or any damages resulting from the use of 
the information contained in this publication, including, without 
limitation, incidental, special, direct or consequential damages. 
OMEGA MAKES NO REPRESENTATIONS OR WARRANTIES 
WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF 
THE CONTENTS HEREOF AND SPECIFICALLY DISCLAIMS ANY 
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS 
FOR ANY PARTICULAR PURPOSE. Omega reserves the right to 
revise this publication and to make changes from time to time in 
the content hereof without obligation to notify any person of such 
revision or changes.

In no event shall Omega be liable for any indirect, special, 
incidental, consequential, or punitive damages or for any lost 
profits arising out of or relating to any services provided by 
Omega or its affiliates. 

It is not possible for Omega to identify all foreseeable uses or 
misuses, therefore all persons involved in commissioning, using, 
or maintaining this product must satisfy their self that each 
intended application is acceptable.

Copyright

This publication is proprietary to Omega and no ownership rights 
are transferred. Neither this manual, nor any of the material 
contained herein, may be reproduced without the prior written 
consent of Omega.

Trademark information

Design Patent D769,141 for the Smart Manometer’s LCD display.

All other trademarks are the property of their respective owners.

Содержание HHP460







































































Отзывы: