Omega CL1000 Series, Руководство пользователя

Страница: 9 / 24

High voltage is present at the power cord connection and inside the calibrator’s enclosure
when connected to the AC mains supply. Do not remove the top or bottom cover of the
calibrator for any reason.
There are no user serviceable parts inside the calibrator. Attempting to service and/or repair
your unit may void your warranty.
2.4.1 Standard (115 VAC~, 50/60 Hz Models)
The CL1000 comes with a standard North American 3-prong AC power cord.
Do not use any other power cord other than the one provided. This cord
provides the proper grounding and has been safety tested by the proper safety
agencies.
2.4.2 International (230 VAC~, 50/60 Hz Models)
On “-230VAC” models an International style power cord with the proper color
code and approvals is provided with stripped wire ends for connection to
the proper connector used in your country or local area, this connector is not
provided. Do not use any other power cord other than the one provided. This
cord provides the proper grounding and has been safety tested by the proper
safety agencies. Make sure when installing your connector to the wire ends
that the ground connection has been made.
Fluctuations in the AC mains powering your calibrator can reduce the accuracy and/or
stability of your calibrator. It is important that you connect your unit to a very stable power
source of the proper voltage.
CL1000 Series Operation
2
2-3
NOTE:
NOTE:
WARNING: