Omega CL1000 Series, Руководство пользователя

Страница: 12 / 24

This calibrator can be set to very high temperatures. Exercise extreme caution when operating
the unit. Keep hands and fingers away from the probe well area. Keep all flammable material
such as paper, plastics and clothing away from the unit.
3.2.3 Available Probe Well Styles
Figure 4. Probe Well Styles
3.2.4 P.I.D. Indicator
When this light is pulsating, the unit is heating up the target plate.
P.I.D. Control:
Proportional, integral, derivative control ( P.I.D.) is a temperature control algorithm used
in high end temperature controllers. The controller causes the process to attain the desired
temperature by turning the process on or off. The process may be a heater or refrigerator. As
the process temperature approaches the setpoint temperature the hot or cold process will be
pulsed to reduce the corrective measures and minimize overshooting. The controller provides
a visual representation of the process status through LED indicators. An indicator may be lit
continuously, blink or shut off entirely to indicate that the process is on, being pulsed, or off,
respectively.
3.2.5 Controller Front Panel Buttons
Modify Key: Press/Hold to view and change setpoint.
Decrease Key: Press in conjunction with “Modify Key” in order to
decrease setpoint.
Increase Key: Press in conjunction with “Modify Key” in order to
increase setpoint.
CL1000 Series Operation
3
3-2
WARNING:
A NOTE:
CL1000A
1/8" 1/16"
1/4" 3/16"
5/32" 1/8"
CL1000B
1/8" 3/16"
1/4"
1/4" 1/8"
CL1000C
1/16" 1/8"
3/16" 3/16"
1/8" 1/16"
CL1000D
1.5mm 6.0mm
2.0mm
3.0mm 4.5mm