Page 75
Programming Features
EG-1800
ATV
SUPPLEMENT
23) Door-Activated Anti-Carjack Protection: Default OFF. This feature causes the Anti-Carjacking Feature described previously to be activated by the
opening of a door at any time while the ignition switch is "on". This Feature may be used alone, or inconjunction with the previous "Ignition Activated
Anti-Carjacking". If a door is opened while the ignition switch is "on", the Anti-Carjacking Feature will engage 53 seconds after the door is closed. The
Valet Switch must be pressed within 60 seconds after the door is shut to cancel the Anti-Carjacking Protection Feature.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is ON. Pressing the small center button will turn this Feature OFF, with
the system'sresponse being two siren chirps (or horn honks).
24) 3rd Channel Activated Anti-Carjacking Protection: Default OFF. This Feature allows remote activation of the Anti-Carjacking Feature. When this
Feature is utilized, pressing the transmitter's small lower button for 3 seconds will activate the 3rd Channel Output, but if the ignition switch is "on", this
operation will also activate the Anti-Carjacking Feature, which is previously described.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is ON. Pressing the small center button will turn this Feature OFF, with
the system'sresponse being two siren chirps (or horn honks).
25) Open Door Arming Alert: Default OFF. When this Feature is utilized, if one of the vehicle's doors is open when the system is armed by using the
transmitter, the siren will chirp (or the horn will honk) and the lights will flash 3 times instead of once upon arming the system. When a door is open upon
arming, this Feature configures the system to have the same arming confirmation as if the hood or trunk were open.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is ON. Pressing the small center button will turn this Feature OFF, with
the system's response being two siren chirps (or horn honks).
26) Current Sensing: Default ON. When this Feature is on, the system will activate while armed if a current draw is detected in the vehicle's electrical system.
As an example, if a vehicle door is opened the system will detect the current draw made by the dome light illuminating.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps to indicate that this Feature is OFF. Pressing the large upper button will turn this Feature ON, with the system's response
being a single siren chirp.
27) Current Sensing Delay 3 Or 210 Seconds: Default 210 Seconds. This Feature sets one of two time delays before the Current Sensing Feature will operate
after arming the security system. Vehicles having delay dome lights or electric cooling fans may require the longer setting. If the optional Omega Pager
is added, the 210 second setting is recommended.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps to indicate that the current sensing delay is now 3 seconds. Pressing the large upper button will return this Feature to
the 210 seconds setting (3 minutes and 30 seconds), with the system's response being a single siren chirp.
