Page 72
EG-1800
ATV
SUPPLEMENT
9) Unlock #2 Upon Ignition "Off": Default ON. As discussed in the previous Feature, your security system is capable of a second door unlock output. If
your system is configured to unlock the driver's door only upon disarming with the transmitter, this Feature may be utilized. This Feature, when activated,
will unlock all of the other doors, after the driver's door, when the ignition switch is turned "off".
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF. Pressing the large upper button will turn this Feature ON, with the
system's response being a single siren chirp (or horn honk).
10) Open Door Bypass For The 3 Previous Features: Default ON. This Feature cancels any automatic doorlock operations associated with the ignition
switch if a door is open at the time the ignition switch is turned "on" or "off". For example, if the security system is programmed to unlock the doors when
the ignition is turned "off", if a door is opened before turning the ignition "off", the doors will not unlock.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF. Pressing the large upper button will turn this Feature ON, with the
system's response being a single siren chirp (or horn honk).
11) Confirmation Siren Chirps (Or Horn Honks) On/Off: Default ON. This Feature allows full-time removal of the audible confirmation siren chirps (or
horn honks). Please note that silent arming or disarming may be done on a onetime temporary basis by pressing and releasing the transmitter's small
center button before pressing and releasing the large upper button. Even if this Feature is used to remove the confirmation chirps (or honks), the
audible Automatic Transmitter Verification
TM
feature will still operate.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF. Pressing the large upper button will turn this Feature ON, with the
system's response being a single siren chirp (or horn honk).
12) Confirmation Siren Chirps (Or Horn Honks) While In Valet Mode: Default OFF. While in Valet Mode, the system will still respond to the
transmitter for the purpose of remotely locking and unlocking the vehicle's doors. This Feature controls the addition or elimination of an audible
confirmation of the security system's response while in Valet Mode. If activated, the system will have confirmation siren chirps (or horn honks) if the
transmitter is used to lock or unlock the while in Valet Mode.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is ON. Pressing the small center button will turn this Feature OFF, with
the system's response being two siren chirps (or horn honks).
13) 30 Or 60 Second Activated Alarm Cycle: Default 60 Seconds. When an armed security system is activated, this Feature determines how long the siren
(or horn) will sound, and how long the parking and dome lights will flash.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is now set for a 30 second activated alarm cycle. Pressing the large upper
button will return this Feature to a 60 second cycle, with the system's response being one siren chirp (or horn honk).
Programming Features
