Omcan MM-IT-0180, Инструкция по эксплуатации

Страница: 12 / 20

12
Maintenance
• Unhook and remove the pins which lock the mixing blades “2” in position Fig. 6.3.3 and “2” Fig. 6.3.4.
• Unscrew the bowl locking knob “3” anti-clockwise Fig. 6.3.4.
• Once having released the mixing bowl rotate (Fig. 6.3.2) by pulling the tilting bar “1” Fig. 6.3.3.
• Open the grille “4” Fig. 6.3.4 and proceed with removing the mixing blades.
• Make sure the mixing blades are positioned to allow for enough space to remove them Fig. 6.3.5.
• Grip the mixing blades one at a time “5” Fig. 6.3.4 and pull outwards to remove.
• The surface is now smooth and easy to clean Fig. 6.3.6, clean the mixer thoroughly and if necessary
disinfect.
• With a sponge soaked with water and a neutral (pH 7) and non-toxic de-greaser (food grade) clean and
remove any food product left on the mixer and on the mixing blades. Do not use petrol, solvents or other
flammable liquids as detergents; only used authorised non-toxic and non-flammable solvents. Take all the
necessary precautions adopting also appropriate protections required for the cleaning product being used
when cleaning and disinfecting the mixer. Always follow the instructions provided for the cleaning product
being used.
MAINTENANCE
RULES
ATTENTION!
The mixer must always be off and the power plug removed from the power socket when servicing and
cleaning. The maintenance area must always be clean, dry and well illuminated. Do not allow unauthorized
staff to service the appliance. Do not put parts of your body, hands or arms into the mixer or openings not
protected where there is the risk of being injured. Always use protective clothing (suitable gloves, glasses etc.)
Do not use petrol, solvents or other inflammable liquids such as detergents. Use authorised non-toxic and
non-inflammable solvents. Do not compressed air to clean the appliance. If it is considered necessary to use
compressed air, use eye protection (glasses) with side protections and limit pressure to a max of 2 atm. (1,9
bar). Do not use a naked flame as lighting when servicing and repairing the appliance.
INTRODUCTION
Regular maintenance and a correct use of the appliance will guarantee a high production rate and safe working
conditions. To guarantee constant efficiency and to avoid voiding the warranty, always and only use original
spare parts.
CHECKS CARRIED OUT ON OUR PREMISES
The purchased appliance has undergone several factory tests. These tests are:
Before setting to work:
• Check operative tension in the appliance which must correspond to the customer’s requirements.
• Check that there are all the warning plates and notices and the ID plate gives all the correct information
and serial number.
• Check bolt tightening torque.
• Check that the appliance corresponds and conforms with the regulations in force and with what is given in
this manual.
With the appliance running:
• Check efficiency of all protections and safety features. When the grille is raised the appliance must
automatically stop.