Omcan MM-IT-0180, Инструкция по эксплуатации

Страница: 6 / 20

6
Safety and Warranty
However, be very careful as this is very dangerous. The injured worker in this situation is an electricity
conductor and touching him / her means being electrocuted. It is important to disconnect the electricity
supply by disconnecting the fuse box and if this is not possible use an insulated object or material (wooden
or PVC stick, fabric, leather, etc...)to pull the injured worker away. Immediately call the nearest health and
safety associate so the injured worker is admitted to hospital for treatment.
• Do not use the appliance in environments where there is gas in the atmosphere creating a high risk of
combustion (explosion).
• Do not repair the appliance without prior authorization.
• Always respect the procedures for maintenance and technical assistance.
PROTECTIONS AND SAFETY FEATURES
ATTENTION
Before using the appliance make sure the safety protections are in their correct position and intact. Check they
function correctly before starting work (at the beginning of a new work shift). If there are problems contact the
maintenance team.
1. Rotor protection grill. This safety feature impedes incidental contact with the rotor. (Fig. 1.8.1).
2. Micro-switch (Fig. 1.8.1).
3. Knob to lock tank.
4. Ball grip for locking the rotor in position.
ATTENTION!
Do Not for any reason tamper with the safety features.
DANGER AND WARNING NOTICES
ATTENTION
When the appliance is connected to the electricity supply do not touch any of the electrical parts. There is
the risk of being electrocuted. Always respect the information given on the warning notices. Non- observance
can cause injuries or even death. Make sure the warning notices are always in their correct position and are
legible. If for some reason they are missing or are illegible fix them to the appliance or replace them.
WORK POSITION
The correct work position for using the appliance is shown in Fig. 1.10.1.
ENVIRONMENT
The appliance is designed for working in the following environment:
• Minimum environment temperature: 5°C / 41°F.
• Maximum environment temperature: +40°C / 104°F.
• Humidity: 50% at 40°C / 104°F.
LIGHTING
Where the mixer is located there should be enough natural light and artificial light conforming with the local
regulations. In any case, the lighting must always conform with the regulations of the country of destination and
should not create dangerous reflections. The lighting must permit the worker to clearly read the control panel