6
Trim the diamond conductive tape in the middle of any of these nine segments so the design
you are making ends up exactly at the copper point at the end of the flat conductive tape.
7
When you have completed your design measure the end of the diamond conductive tape…
8
…and cut it in the center of the closest segment.
9
Place the cut end of the diamond conductive tape against the copper point at the end of the
flat conductive tape and solder them together. Make sure that you make a good clean joint.
You can now put away your soldering iron.
Attaching the Diamond Conductive Tape for Electric Guitars
26
OMB User Guide - Version 0.I
