Continue as follows:
6
8
7
1
2
4
3
5
1
Clean the body of the guitar below the bridge with soft cloth and your favorite cleaning fluid.
2
Set the Base on the body of the guitar so the holes on the flex connector line up with the pin
holes on the bridge.
3
Gently put the first string through the flex connector, taking care not to rip or damage it.
J
Most nickle-coated steel strings are compatible with OMB technology. However, we
recommend that you use the strings provided in the OMB Upgrade Kit.
4
Lock the first string in place with its pin. Again, take care not to rip or damage to flex
connector.
5
Continue stringing your guitar in the same way.
6
When you completed the last string slightly angle the base upward…
7
…remove the adhesive backing, take the adhesive strip…
Attaching the Add-On Device to Bridge-Pin Acoustic Guitars
11
OMB User Guide - Version 0.I
