PV8355F4E007 20
(3)
The Information window opens that displays the sampling interval. After that, Click
OK to end the operation.Then, the shutter operates again.
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌
4.9. Acquiring a background value
(1) Click BACKGROUND1 on the operation panel.
A clicky sound is generated, and then a warning alarm sounds as the process finishes.
As the data is saved, an asterisk (*) appears at the left of BACKGROUND1 in the
operation panel.
4.10. Acquiring a reference value
(1) Click REFERENCE on the operation panel.
The shutter sounds, the reference value is captured. After that, the shutter operates
again, and a warning alarm sounds as the process finishes.
As the data is saved, an asterisk (*) appears at the left of REFERENCE in the
operation panel.
4.11. Setting a measurement sample
(1) Install the measurement sample on the upper surface of the tilt stage. The
measurement sample is placed at the holed point in the center of the stage.
4.12. Adjusting the position of a measurement sample
(1) Adjust the tilt of the measurement sample.
Perform the tilt adjustment of the measurement sample in the same way as in (3) of
“
4.7 Position adjustment of a reference (standard light flux).
”
(2) Adjust the shift of the measurement sample.
Perform the shift adjustment of the measurement sample in the same way as in (4) of
“
4.7 Position adjustment of a reference (standard light flux).
”
4.13. Spectrometry
(1) Click MEASURE on the operation panel.
The shutter sounds, indicating the start of spectroscopy. When alarm sounds and
spectroscopy is ended, a shutter sounds again.
The result is displayed in the sub-windows. Up to 20 results can be stored.
