Olympus USPM-RU-W Series, Инструкция по эксплуатации

Страница: 16 / 29

PV8355F4E007 14
4. Usage
This chapter describes the outline of the equipment operation according to the general
procedure. For details on use, conduct full training from the standpoint of a specialist.
4.1. Measurement flow
(1) Start the controller supply unit and computer and then start the software.
→ See “ 4.2 Start-up . ”
(2) Select the objective lens.
→ See “ 4.3 Revolver settings . ”
(3) Set the switching of the optical path. (Option: Customers who purchase a 45-degree
expansion unit)
→ See “ 4.4 Optical path switching settings . ”
(4) Set the polarization state. (Option: Customers who purchase a polarization unit)
→ See “ 4.5 Polarization state settings . ”
(5) Set a work setting file.
→ See “ 4.6 Setting a work setting file . ”
For reference setting, select [FIXED] and enter 100[%].
(6) Adjust the position of the reference (standard light flux).
→ See “ 4.7 Position adjustment of a reference (standard light flux) . ”
(7) Set the sampling time.
→ See “ 4.8 Adjusting the sampling time . ”
(8) Acquire a background value.
→ See “ 4.9 Acquiring a background value
(9) Acquire a reference value.
→ See “ 4.10 Acquiring a reference value . ”
(10) Install a measurement sample.
→ See “ 4.11 Setting a measurement sample . ”
(11) Adjust the position of the measurement sample
→ See “ 4.12 Adjusting the position of a measurement sample . ”
(12) Perform measurement.
→ See “ 4.13 Spectrometry . ”