5. Once you have verified that the problem is not with the cell or the meter, it is time to remove, clean and
lubricate the aperture blades. You can desolder the hot shoe wire to set the top aside and out of the way. This
makes the camera easier to handle, but is not necessary as long as you are careful. Now remove the bottom
plate. This is held on with two screws. Put the two little screws in the second cup of the ice cube tray.
Содержание TRIP 35
Страница 10: ...10 Remove the screws that hold the photocell in place Put them into the next cup of the ice cube tray ...
Страница 11: ...11 Gently lift up the photocell Grasp the wires and gently pull them thru the camera body ...
Страница 16: ...16 While the aperture assembly is soaking remove the rear lens assembly and clean it ...