6. The front, inner ring is connected to the front lens element by three set screws, so the front lens element turns
as the front ring rotates. The front lens element is mounted on threads, so it moves in and out as it turns. A
tang on the front ring engages the focus ring, so that the front ring and the focus ring move as a unit. Look in
the front of the lens while you turn the focus ring. You’ll see the front ring, lens, and focus ring all move
together.
Set the focus to infinity (the mountain icon). Loosen the three set screws around the outside of the inner
ring. Do not remove them the whole way, just loosen them (If they are removed completely they will be
difficult to reinstall). Be careful not to rotate the ring as you remove it. Lift it straight off. Put the inner ring
in the third cup of the ice cube tray.
Содержание TRIP 35
Страница 10: ...10 Remove the screws that hold the photocell in place Put them into the next cup of the ice cube tray ...
Страница 11: ...11 Gently lift up the photocell Grasp the wires and gently pull them thru the camera body ...
Страница 16: ...16 While the aperture assembly is soaking remove the rear lens assembly and clean it ...