E
178
4
The subject is not within the working range of the camera
or is difficult for the autofocus to lock on.
[
See the working ranges of the Standard mode and
Macro mode, or refer to the Autofocus section. (P.90/86)
5
All five Memory blocks are displayed on the control panel.
[
Wait until a block disappears. (P. 78)
6
The main flash is being charged.
[
Wait until the Orange lamp goes off. (P. 100)
7
No card in the camera or the card is protected.
[
Use a new card.
The main flash does not fire.
1
The flash is not set.
[
Push the Flash pop-up lever to set the flash. (P. 100)
2
The subject is bright.
[
Use the Fill-In flash mode. (P. 110)
3
When the
indicator lights on the control panel with the
flash set, the flash is out of order.
[
Have it repaired.
The pictures just taken do not appear on the LCD
monitor.
1
The power is off or the Record mode is on.
[
Set the Record/Play switch to Play, and turn on the
power. (P. 118)
2
There is no picture in the card.
[
Check the control panel. (P. 118)
The LCD monitor is hard to read.
1
Brightness setting is wrong.
[
Select BRIGHTNESS from Menu in the Play mode,
and perform the required adjustment. (P. 146)
2
The sun is shining on the monitor.
[
Block the light with your hand, etc.
Содержание Sigital Vision D-620L
Страница 198: ...MEMO...
Страница 199: ...MEMO...