Olympus Sigital Vision D-620L, Инструкция по эксплуатации

Страница: 80 / 200

E
80
6
Press the Power button to turn it off.
●
The picture data remains in the SmartMedia card even
after the power is turned off or the batteries are replaced.
Do not open the Card compartment cover, remove the
batteries or unplug the AC adapter while the Card access
lamp is blinking.
◆
When the batteries run out while taking pictures,
the power may turn off. If the
lights or both
and the frame number blink,
the picture just taken was not recorded properly.
Replace the batteries and take the picture again.
◆
The LCD monitor cannot be used as a viewfinder.
◆
The Power button and the Menu button cannot be
operated while the Card access lamp is blinking.
If the Record/Play switch is pressed while the
lamp is blinking, the camera enters the Play
mode when the lamp goes off.
◆
If the card is full when the Shutter release button
is pressed, the Memory block(s) and the number
of remaining pictures on the control panel blink,
and the picture cannot be taken.
◆
The image size of a print is bigger than what you
see in the viewfinder or on the LCD monitor.
Note:
Memory blocks
Blocs mémoire
Bloques de memoria
All five Memory
blocks appear.
Tous les cinq blocs
mémoire
apparaissent.
Aparecen todos los
cinco bloques de
memoria.
Camera starts
recording.
L’appareil commence
l’enregistrement.
La cámara empieza a
grabar.
Control Panel
Écran de commande
Panel de control