Olympus PT-038 - Underwater Housing For FE-230, Инструкция по эксплуатации

Страница: 42 / 268

EN 4
EN
CAUTION
1 Do not disassemble or modify this product. This may cause water leakage
or trouble. In case of disassembly or modification by persons other than
those appointed by OLYMPUS IMAGING CORP. the guarantee shall not
apply.
2 Do not place this product at locations with abnormally high or abnormally
low temperatures or at locations with extreme temperature changes. The
product may deteriorate.
3 Opening and closing at locations with much sand, dust, or dirt may impair
the waterproof characteristic and cause water leakage. This should be
avoided.
4 This product has been designed and manufactured for use at a water depth
within 40 m. Please note that diving to a depth in excess of 40 m may cause
permanent deformation or damage to the Case and the camera inside the
Case or may lead to water leakage.
5 Jumping into the water with the Case in your pocket or in your hand,
throwing the Case from a boat or ship into the water, and other rough
handling may cause water leakage. Please handle with sufficient care,
when handing it over from hand to hand etc.
6 If the camera on the inside should become wet because of water leakage
etc., immediately wipe off all moisture and confirm the operation.
7 Please remove the O-ring when traveling by air. Otherwise air pressure
may make it impossible to open the Case.
8 For safe use of the digital camera in this product, please read the
“Instruction Manual” for the digital camera carefully.
9
When sealing this product, take sufficient care that no foreign matter gets
caught at the O-ring and the contact surfaces.
Batteries
z Use only an Olympus lithium-ion rechargeable battery (LI-42B or
LI-40B) with the camera.
z Take care that the battery electrodes do not become wet. This may
cause trouble or accidents.
z Carefully read the instruction manual for the camera about other
cautions regarding batteries.
PT038_EN.book Page 4 Tuesday, December 26, 2006 12:54 PM