Olympus PSD-30 Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 96

Olympus PSD-30 Скачать руководство пользователя страница 87

Appendix

83

ELECTROSURGICAL UNIT PSD-30

Item

Specification

Safety
functions

Self-check
monitor

The function detects whether the safety monitor
functions mentioned above are working correctly or
not. It activates the following functions if
abnomalities are detected:

• All indicators on the front panel will flash.

• An alarm will sound.

• Change of setting will be prevented.

• Output will be prevented.

Feedback ratio
monitor

The irregularities are detected by calculating the
ratio of delivered current (through either A-cord) to
return current (through patient plate and S-cord). If
the irregularities are detected, the following functions
are triggered:

• High frequency output warning indicator will light.

• If the above condition continues for a while, an

alarm will sound and high frequency output will be
prevented.

When using an endoscope without a S-cord, high
frequency output warning indicator will light, an
alarm will sound and high frequency output will be
prevented.

Additional
functions

Stand-by mode

When output is not performed for a long period and
the stand-by mode is selected, the following
operations are prevented:

• High frequency output.

• Change of setting classification (electromedical

equipment)

Adjusting the
volume

• The output volume can be adjusted in the stand-by

mode.

PROGRAM
mode

Call the setting and CUT/COAG. mode stored in the
memory.

«
...
85
86
87
88
89
...
»

Содержание PSD-30

































































































Отзывы:

Нет отзывов