– 8 –
5
With the orientation of index visible, put your hands in the folded drape and
hold the lens hood.
6
Align the convex shape part of the drape attaching bezel
of the microscope section with the convex shape part of
the lens hood and push firmly until the lens hood hits the
drape attaching bezel.
7
Hold the lens hood and pinch the seal part,
spread the drape along the arm.
8
Push firmly until the lens hood hits the drape attaching bezel.
9
Wrap the grip sheet around the grip section of
the microscope section and hold down the
slack of the drape. Peel off the release paper at
the end of the grip sheet and firmly press the
attaching bezel and attach it onto the grip
sheet.
10
Operate the scope switch C of the microscope section and the custom switches 1 to 3, and confirm that each
switch is not pushed and it can operate each switch without a feeling of getting caught. Feel uncomfortable
with the operation of each switch, repeat from Step 9.
Lens hood glass section
Lens
hood
Index
Convex
shape part
Lens
hood
Convex shape part
Arm
Seal part
Attach it onto the
grip sheet
Grid sheet
Adhesion
part