Olympus OEV262H, Инструкция по эксплуатации

Страница: 48 / 56

_ _ _ _
OEV262H
A
p
pe
nd
ix
EMC information
48
EMC information
• The OEV262H needs special precautions regarding
EMC and needs to be installed and put into service
according to the EMC information provided in this
instructions for use.
• The portable and mobile RF communications
equipment such as cellular phones can affect the
OEV262H.
WARNING
The use of accessories and cables other than those
specified may result in increased emissions or decreased
immunity of the OEV262H.
WARNING
If the OEV262H should be used adjacent to or stacked
with other equipment, it should be observed to verify
normal operation in the configuration in which it will be
used.
Guidance and manufacturer’s declaration-electromagnetic emissions
The OEV262H is intended for use in the electromagnetic environment specified below.
The customer or the user of the OEV262H should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment-guidance
RF emissions
CISPR 11
Group 1 The OEV262H uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Radiated emissions
CISPR 11
Class A This instrument is suitable for use in all establishments other
than domestic establishments and those directly connected to a
low voltage power supply network that supplies buildings used
for domestic purposes.
Mains terminal
conducted emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Class D This instrument’s harmonic emissions are low and are not likely
to cause any problem in the typical commercial power supply
connected to this instrument.
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies This instrument stabilizes its own radio variability and has no
effect such as flicker in lighting apparatus.