Olympus OEV262H, Инструкция по эксплуатации

Страница: 12 / 56

_ _ _ _
OEV262H
1
. Fe
at
ur
es
1
1.1 Features
12
1.1 Features
Compliance with medical safety
standards in U.S.A., Canada and Europe
IEC 60601-1 and product safety standards in the U.S.A.,
Canada and Europe have been obtained for this monitor.
The monitor is designed for use in medical treatment,
with the sheet switch, screen protect panel, etc.
Picture
Fully digital 10-bit signal processing circuit
As well as digital signals, all signals including analog
signals are converted into digital signals. All signals are
processed using a fully digital 10-bit processing circuit
so that an image is produced in smooth gradation
without any deterioration of quality.
Two color systems available
The monitor can display NTSC and PAL signals by
connecting this unit.
High image-quality/high-resolution Full HD
panel
A Full HD high-resolution (1920 × 1080 dots) panel and
high brightness/ultra-wide field of view technology
enable you to use the monitor under various lighting
conditions and in numerous ways (installing on wall,
using several monitors to view an image, and so on.).
Because a color filter with wide-color reproduction and
LCD materials with high response speed are used, the
motion picture of the video signal is displayed more
clearly.
This monitor also performs sampling of signals at high
frequencies and provides a high resolution during the
RGB or component signal input.
Input
The monitor has the variety of input connectors and is
compatible with the various types of signal.
Input connectors
COMPOSITE input connector × 1
Y/C input connector × 1
HD15 input connector (RGB/COMPONENT
compatible) × 1
SDI input connector (3G/HD/SD compatible) × 2
DVI input connector (DVI-D/ANALOG RGB) × 2
Compatible signals
Analog signal/Digital signal/Analog PC signal VESA
(DMT)/Analog PC signal VESA (CVT)/Digital PC
signal/X-ray equipment signal
*
For details of the compatible signals for each
connector, see ?Available signal formats? (page 44).
You can set the Color Temperature, Gamma, Scan Size,
Mono, Phase, Chroma, Brightness, Contrast, Sharpness,
A.I.M.E., Input Name, Input Skip, Flip Pattern, RGB
Range, RGB/YPbPr, Sync Detect, ACC, CTI, NTSC
Setup, and SD Aspect settings for each connector.
*
Depending on the input connector, some items
cannot be set. For details of the setup items, see ?2.2
Input Signals and Adjustable/Setting Items?
(page 16).
Output
The monitor has output connectors that are equivalent of
the input connectors, and outputs the corresponding
signal.
Output connectors
COMPOSITE output connector × 1
Y/C output connector × 1
HD15 output connector (RGB/COMPONENT
compatible) × 1
SDI output connector (3G/HD/SD compatible) × 2
DVI output connector (DVI-D (does not support
HDCP)/ANALOG RGB) × 2
Dedicated output for the recording equipment
(CLONE OUT connector)
The monitor can output pictures that appear on the
display to the second or third monitor, or recording
equipment, from the recording equipment output
connector (HD-SDI, 3G-SDI). Pictures are output in the
preset format, regardless of the type of input signal or
format. When displaying the Flip, you can select the
picture for output (Flip picture or upright picture).
*
For details of the output setting, see page 30.
1. Features