Olympus OEV262H, Инструкция по эксплуатации

Страница: 24 / 56

_ _ _ _
OEV262H
4
. Ins
p
ec
tio
n
4
4.1 Power supply / 4.2 Inspection of the displayed image
24
WARNING
Before using the monitor, be sure to inspect and set it up
as described in this chapter. Also inspect the ancillary
equipment to be used in combination with this monitor
as described in the instruction manuals for the
equipment. If any irregularity is observed with the
monitor, do not use it and take remedial actions as
described in Chapter 6, “Troubleshooting.” If this
cannot restore the normal operation, contact Olympus.
Using the LCD monitor (OEV262H) while an
irregularity is observed does not only result in
malfunction but may also cause an electric shock, injury
and/or fire.
4.1 Power supply
Inspecting the power supply
Confirm that the monitor can be turned On as described
in Section 2.1, “Front Panel” on page 14 and Section
3.2, “Connecting the AC Power Cord” on page 19.
The power indicator lights in green when you set the
power switch on the bottom of the monitor to ON.
If the power fails to turn on
When the power fails to turn on, turn this monitor off.
Then check this monitor referring to Chapter 6,
“Troubleshooting.” If the power still fails to turn on,
contact Olympus.
4.2 Inspection of the
displayed image
WARNING
Before using high-frequency electrosurgical equipment,
be sure to install and connect the equipment according to
its instruction manual and make sure that the noise does
not affect the observation of surgical procedures. If
high-frequency electrosurgical equipment is used
without such confirmation, patient injury may result.
1
Connect the required ancillary equipment as
described in Chapter 3, “Installation and
Connection,” turn all the ancillary equipment On,
and confirm that the monitor displays an image.
2
Observe the palm of a hand, for example, with the
endoscope and confirm that the endoscopic image
is normal.
3
Confirm that there are no cracks in the LCD panel.
4. Inspection
Power switch