Olympus OEP-5, Инструкция по эксплуатации, Страница: 72 / 88

Car
e
, S
tor
a
ge
and
Dis
po
s
a
l
6
6.1 Care / 6.2 Displacement
72
6.1
Care
After using this instrument, immediately perform the
following cleaning procedure. If cleaning is delayed,
residual organic debris will begin to solidify, and it may
be difficult to effectively clean this instrument. Cleaning
should be carried out routinely.
WARNING
• If this instrument is wiped with a piece of moistened
gauze, dry this instrument thoroughly before use.
Using it while wet may result in an electric shock.
• During cleaning, always wear appropriate personal
protection equipment, such as eye wear, face mask,
moisture-resistant clothing and chemical-resistant
waterproof gloves that fit properly and long enough so
that your skin is not exposed. Blood, mucus and other
potentially infectious material adhering to the monitor
could pose an infection control risk.
CAUTION
• Do not clean the terminals or the AC power inlet.
Otherwise, deformation or corrosion of contacts could
occur, which may result in contact failure and/or
malfunction of this instrument.
• Do not soak this instrument in water, autoclave, or
attempt to gas sterilize it. Doing so will cause
equipment damage.
• Do not wipe the external surface with hard or abrasive
material. The surface will be scratched.
• Minimize the opportunities of using neutral detergent
to clean the instrument. Also do not wipe this
instrument with too strong a force, as this may damage
the surface finish.
1
Turn the color video printer (OEP-5) OFF and
disconnect the power cord from the wall mains
outlet or mobile workstation.
2
To remove dust, dirt or other non patient debris,
wipe color video printer (OEP-5) using a soft, lint-
free cloth or piece of gauze moistened with 70%
ethyl or isopropyl alcohol.
3
If the color video printer (OEP-5) is soiled with
blood or other potentially infectious materials, first
wipe off all gross debris using a neutral detergent.
Then wipe with a lint-free cloth or gauze moistened
with a surface disinfectant.
4
Make sure that the color video printer (OEP-5) is
completely dry before use.
6.2
Displacement
WARNING
Do not displace this instrument connected with the
power cord and/or connected cables. If the power cord
and/or connected cables are damaged, electric shock
and/or fire may result.
CAUTION
• Move this instrument only after taking out the ink
ribbon holder. Otherwise, damage to this instrument
may result.
• Move this instrument only after taking out the paper
tray. Otherwise, the paper tray may unlock and fall,
causing an injury to the user or damage to this
instrument.
• Do not displace this instrument by grasping the ink
ribbon holder insertion part and/or paper exit. Damage
to this instrument may result.
1
Turn the color video printer (OEP-5) OFF
according to the “4.4 Exiting from Examination” in
“INSTRUCTIONS (BASIC),” and disconnect the
power cord from the wall mains outlet or the power
supply socket of the mobile workstation.
2
Take out the ink ribbon holder and the paper tray
from main body.
3
Remove connected equipment from the color video
printer (OEP-5).
4
Displace the color video printer (OEP-5). Install
and connect, referring to “Chapter 2 Installation
and Connection.”
Chapter 6 Care, Storage and Disposal