Olympus OEP-5, Инструкция по эксплуатации, Страница: 70 / 88

S
yst
e
m
S
e
tu
p
5
5.16 Setup of the “ZM ADJ(S)” “ZM ADJ(L)” Menu
70
2
Press “
v
” or “
V
” to select from among “OFF,”
“PART,” “ALL” and “REMOTE,” and press the
“ENTER” button (see Figure 5.22).
Figure 5.22
5.16
Setup of the “ZM
ADJ(S)” “ZM
ADJ(L)” Menu
When an HDTV signal is input to this instrument and 4
multi-picture images are to be printed, this menu can be
used to zoom into one or all of the images by setting the
image capturing range. For the relationship between the
image capture positions and settings, see Figure 5.24.
This setup should be performed while referring to the
memory image displayed in the background of the
menu.
Setup of “H START (NR),” “V START (NR),” “H
START (WD)” and “V START (WD)” in the “ZM ADJ
(S)” menu and the “ZM ADJ (L)” menu are for future
expansion. Not used.
CAUTION
Depending on the image capturing range, the characters
on the endoscopic image (patient data, recording device
counter, comment, etc.) may not be printed.
If patient data is not printed, be careful not to mix up
printed pictures between different patients.
To display the “ZM ADJ (S)” menu
1
Press the “MENU” button to initiate the menu
display.
2
Press “
v
” or “
V
” to select “ZOOM SETUP,” and
press the “ENTER” button.
3
Press “
b
” or “
B
” to display the “ZM ADJ (S)”
menu (see Figure 5.23).
Figure 5.23
Setting “H START (RS),” “V START (RS),” “H
WIDTH” and “V WIDTH”
1
Press “ v ” or “ V ” to select from “H START (RS),”
“V START (RS),” “H WIDTH” and “V WIDTH,”
and press the “ENTER” button.
OFF :
Prints normally without zooming into any
image.
PART : Zooms into three of the four (second, third
and forth) multi-picture images.
ALL : Zooms into all of the four multi-picture
images.
REMOTE : This function is for future expansion.
Not used.
ZOOM PART “OFF”
ZOOM PART “ALL”
ZOOM PART “PART”