Olympus OEP-5, Инструкция по эксплуатации, Страница: 43 / 88

Op
er
at
ion
4
4.2 Control From the Front Panel
43
• Do not leave 10 or more print sheets on the paper exit.
Otherwise, paper jam may result. Also, even when the
number of print sheets is less than 10, message
“REMOVE PRINTS” may be displayed on the
monitor and LCD panel and printing is interrupted
depending on the print sheet conditions. If this occurs,
remove the print sheets from the paper exit. Printing
will resume automatically.
• If you turn OFF this instrument while the “PRINT”
lamp is lit, the ink ribbon quantity displayed on the
remaining ink ribbon display on the LCD display and/
or the monitor may not match the actual ink ribbon
quantity remaining.
Be sure to turn this instrument OFF after printing is
completed and the “PRINT” lamp turns off.
NOTES
• If a paper jam occurs while printing is in progress,
refer to “4.3 In the Case of a Paper Jam” in
“INSTRUCTIONS (BASIC).”
• You cannot store an image in a memory page that is
currently printing, or is reserved for printing. Wait
until the printing completes.
• If you open the front door during printing, printing is
interrupted. If you close the front door, the print sheet
being printed is ejected. To print again, press the
“PRINT” button.
• If the remaining print sheets in the paper tray
decreases, a rattling sound may be heard during
printing. This is not a malfunction.
• Depending on the environment in which this
instrument is used, or the condition of the print sheets,
printed sheets output from the paper exit may go over
the stopper and drop from the paper exit. Printed
sheets may slide between previously ejected print
sheets, and may not stack up in the printed order.
1
Press the “PRINT” button.
The image(s) in the currently selected memory
page will be printed out (see Figure 4.12).
Figure 4.12
Capturing an image and reserving its
printing during printing of another image
1
Select the memory page as described in “Selecting
the Memory Page” on page 43.
2
When the desired image is displayed, press the
“CAPTURE” button to store it in the memory of
color video printer (OEP-5).
3
If the captured image is to be printed, press the
“PRINT” button.
Printing of that image is reserved and it starts to be
printed as soon as the current image printing has
completed.
If the print sheets run out during printing
Printing is terminated. If, for example, the print quantity
is set to 5 and the print sheets run after 3 prints, 5 prints
will be made if the “PRINT” button is pressed simply
after refilling the paper tray with print sheets and
confirming the memory image. To print only the
unprinted 2 sheets, the print quantity should be reset
before pressing the “PRINT” button again.
Selecting the Memory Page
The memory pages refer to the pages in memory where
images are stored. The number of available memory
pages varies depending on the number of multi-picture
images and connected equipment (see Table 4.3). For
details, see “Setting “MULTI PIX”” on page 64.
PRINT button
Table 4.3
Number of multi-
picture images
Available memory pages
1
(without screen splitting) A, B, C, D, E, F, G, H
2 A, B, C, D
3 A, B
4 A, B